BFT MITTO 2 handsender, BFT B RCB04 fernbedienung 2-befehl – MetroUpdate derLaden

0
15

LATEST VERSION OF THIS POPULAR BFT REMOTE OPERATES ON 433,92MHz. Model MITTO 2 B RCB02 requency 433.92 MHz Number of buttons 2 Power Battery A23 12Vanadium Coding: rolling code Dimensions: 80 mm ? 38 mm ? 18 mm. Battery and instruction included. How To Kode Mitto’sThe following process will only work if your control panel has been enabled for remote programming by the installer. If the following process does not work you will need the assistance oder Ähnliches approved BFT installer You must be at the control panel. (It does not need to be open)You will need one existing, functional, transmitter already coded on the system and any new/replacement transmitters readily to hand.The following sequence must be followed sequentially in rapid succession; any pause in the process will cause the system to time out.Read and familiarise yourself with the process before commencing.1. Press the hidden button on the back of the transmitter already stored on the system for 2 seconds(If it has no hidden button use the top two front buttons together instead)Old type Mitto New type Mitto2. Press the functioning button on the front of the transmitter already stored on the system for 2 seconds3. Press the hidden button on the back of the new transmitter for 2 seconds(If it has no hidden button use the top two front buttons together instead)4. Press the desired button on the front of the new transmitter for 2 secondsRepeat 3 & 4 for as many transmitters as are to be added to the system, but ensure there is no pause between operations to prevent time out 5. Leave 20 Seconds before attempting to use your new transmitter(s) for the board to reset Coding is now complete. If this process fails to enable your new transmitter(s) contact your local approved BFT Installer,

Coding: rolling code
Battery: A23 12Vanadium
Number of buttons: 2
Size: 80 mm; 38 mm ; 18 mm

– –

LEAVE A REPLY

Please enter your comment!
Please enter your name here